Gerbing MicroWirePRO® Heated Premium Jacket Liner

SKU: HJL Categories: ,

£199.99

Enquire about this product
  • * Mandatory fields

    Please select in which ways you would like us to keep you informed of offers or news from us - and us only.

    Newcastle Motorcycles can contact me about Products, Services, Events and Offers by...

  • This field is for validation purposes and should be left unchanged.

Overview

Gerbing's Warmest, Most Comfortable Heated Motorcycle Jacket Liner EVER! A Game-Changer For Riding In Cold Weather

Model in the video wears the XL size, is 6ft and 15.5 stones (see size guide below)

Our flagship product has been redesigned for winter 2021 and is better than ever.

The MicroWirePRO® Gerbing Premium Heated Jacket Liner now offers customers a more tailored compression fit, with even more of our patented heating wire distributed throughout the front and back of the jacket, the collar and the sleeves. A stretch material down each side of the body and the inside of each arm ensures an extremely comfortable, snug fit, but with full stretch to prevent the chances of bulking under your outer jacket.

This top-of-the-range heated jacket liner has 3 input connections situated inside the front pocket which, when used with one of our temperature controllers, will allow the wearer to regulate the heat settings. The first plug draws the power for the heated jacket liner. The second is the power draw plug for Gerbing MicroWirePRO® heated gloves, which can be connected to the sleeves of the jacket liner. The third plug is the accessory plug, which can be connected to your heated trousers and/or heated socks.

Designed to replace your existing jacket liner, our MicroWirePRO® heated liner, with its unique heating system, allows you to wear your existing outerwear whilst providing an even distribution of warmth throughout the body. We recommend this jacket liner is worn with a long-sleeved base layer underneath. With over 35 metres of heating wire in our heated jacket liner, we guarantee that you will be kept warm, even in sub-zero temperatures!

Gerbing's Premium heated motorcycle jacket liner can also be powered from our powerful 9Ah battery.

Constructed from a soft, wind-resistant nylon shell, this tailored jacket is designed to be a lightweight and highly compressible garment - the perfect item to pack for those trips with unpredictable weather conditions.

  • Heating pads on the chest, back, collar, and sleeves.
  • Compressible, water-repellent, durable, Thinsulate® insulation soft shell.
  • Water-repellent zip.
  • Inside and outside pockets.
  • Silky-soft micro denier collar.
  • Firm-fitting patterns and sizing to fit snugly and easily under your outer motorcycle garments.
  • Built-in sleeve plugs to enable Gerbing gloves to be directly fitted to, and powered from, the jacket liner.
  • Glove plug pockets in sleeves to secure the glove plugs when not in use.
  • 2 dual-wiring circuits to enable gloves and any other Gerbing product to be controlled independently from the jacket (if used with temperature controller).
  • Lifetime warranty on heating elements.
  • Battery harness included

***IMPORTANT - PLEASE NOTE***

Used with just the battery harness, this jacket will operate at maximum heat, which unless used in extremely cold climates (i.e Scandinavia), will be too hot and could cause skin discomfort unless disconnected. In order to adjust the temperature you will need a Gerbing temperature controller. To view available options, depending on your requirements.

SIZE GUIDE

The table below gives the actual measurements of each jacket size. Please note that the jackets have a compression fit, with wide stretch panels on the inside of the arms and at each side of the torso. Choose the size nearest to your measurements for maximum warmth and best fit. Experience has shown that most jacket exchanges occur because customers feel their jackets are too small. If in doubt, or if you prefer a slightly looser fit, order the next size UP.

JACKET SIZE CHEST MEASURMENT
XXS 34" (86cm)
XS 36" (91cm)
S 38" (97cm)
M 40" (102cm)
L 42" (107cm)
XL 44" (112cm)
XXL 46" (117cm)
XXXL 48" (122cm)

You are buying from a Gerbing Uk Stockist, so will receive a proper Gerbing warranty.

  • Internal Heating Wire - Lifetime
  • Manufacturing faults - 1 Year
  • Temperature controllers, Connector Plugs and Accessories - 3 Years
  • Batteries and Chargers - 90 Days
  • Accidental damage - Not Covered
  • Fair Wear & Tear - Not Covered