NEW
2019

CBR500R

  • £6,099.00
Available | Usually dispatched from the warehouse within 48 hours
    Loading...

    2019 Honda CBR500R
     


    Model updates: Honda’s A2-compatible ‘pocket rocket’ gets an aggressive, aerodynamically-driven sports makeover, plus a racier riding position. The engine has more low-to-mid range power and torque, and is also now equipped with an assist/slipper clutch. New LCD instruments and LED indicators round out the updates.
     
    Contents:
    1 Introduction
    2 Model overview
    3 Key features
    4 Accessories
    5 Technical specifications
     

    1. Introduction
     
    Honda’s fully-faired CBR500R – launched in 2013 alongside the naked CB500F and adventure-styled CB500X – gives a genuine sporting energy to its fun-focussed twin-cylinder ‘light middleweight’ trio.
     
    Suitable for riders looking to move up from a smaller machine, it instils the excitement of sports bike ownership into every ride yet also delivers sensible running costs, making it a great bike to both commute through the working week and enjoy at the weekend. It’s also found favour with experienced riders looking to downsize their machinery, while preserving the essence of enjoyable motorcycling.
     
    In 2016 the CBR500R assumed sharper styling and LED lighting to go with upgrades to its front suspension; for 2019 it gets an even more aggressive makeover, with a new form and riding position that outlines a keener sporting intent. Its engine is stronger off the bottom and spins readily to the redline, delivering a thrilling howl in the process.
     
    The CBR500R has always proved fast, frugal, affordable and fun. And for 2019 its spirit has not changed – more of the same, yes; and a little something extra.
     
     
    2. Model Overview
     
    Contrasting angles and shaping – between the very slim and more muscular – from the fairing nose to the seat unit outline the CBR500R’s new look. It’s an ergonomic design for the rider to use aggressively which also features improved aero management. Clip-on handlebars now mount below the revised top yoke and the riding position is canted further forward.
     
    While its engine maintains the 35kW required for A2 licence holders, it now makes 4% more power and torque between 3-7,000rpm thanks to revisions to the inlet, exhaust and valve timing. It also now features an assist/slipper clutch.
     
    New LCD instruments feature a Shift Up and Gear Position function and the indicators are now LED, to match the rest of the lighting. While the chassis remains essentially unchanged a new rear shock absorber delivers consistent damping performance and improved control.
     
     
    3. Key Features
     
    3.1 Styling & Chassis
     
        •    Aggressive new lines with purposeful, dual LED headlights
        •    Aerodynamically efficient and ergonomically comfortable
        •    Re-sited clip-on handlebars give a sportier riding position
        •    New LCD instrument display, with Gear Position and Shift Up indicators
        •    LED indicators
     
    For its 2019 evolution the CBR500R’s fully faired form is made more aggressive still with straight, wedge-like feature lines and extended lower fairings that emphasise a real sense of speed. The rider’s seat pad and seat unit – plus the upper and side fairings – have been narrowed to improve ergonomics and movement. Sharply- chiselled dual LED headlights stare menacingly ahead, and the addition of LED indicators now means all lighting is LED
     
    The view forward, from the CBR500R’s cockpit, is pure sports. The handlebars now clip on beneath the sporty, redesigned top yoke and as a result the riding position is canted 8° further forward; the fairing is also set lower, to give the rider Total Control ­– the design philosophy behind the styling redesign, and a mantra for Honda’s super sports range since the 1992 arrival of the Fireblade.
     
    New LCD instruments feature a Gear Position and Shift Up indicator; this is set to a default 8,750rpm but can be adjusted in 250rpm increments between 5-8,750rpm
     
    The 35mm diameter steel diamond-tube mainframe is unchanged for 2019. It’s light and strong, with a tuned degree of yield that gives plenty of feedback to the rider as road surfaces change. The shape and position of the engine mounts, plus the frame’s rigidity balance also reduces vibration.
     
    Wheelbase is 1410mm and rake and trail are set at 25.5°/102mm giving nimble, yet confidence-inspiring steering. Mass centralisation, with the engine in close proximity to the swingarm pivot point, delivers turning agility and optimum front/rear weight distribution ensures stability. Kerb weight is 192kg.
     
    Seat height remains low at 785mm, making the CBR500R very easy to manage and its riding position comfortably accommodates riders of any height. Overall dimensions are 2080mm x 75mm x 1145mm, with 130mm ground clearance. The fuel tank holds 17.1L, including reserve and combined with the engine’s excellent fuel economy gives a range of 480km (over 260 miles).
     
    The 41mm telescopic front fork, with 120mm stroke, delivers a compliant yet controlled ride and gives great feel for front tyre grip. A new single-tube rear shock absorber (as found on larger capacity sports bikes) replaces the double-tube design of the previous model; its large-diameter piston ensures excellent suspension response and temperature management. It has 9-stage spring preload adjustment and works through a rigid box-section steel swingarm, which now features pressed steel chain adjustment end-pieces. Final drive is via sealed 520 chain.
     
    Lightweight, 17-inch cast aluminium wheels employ hollow cross-section Y-shaped spokes. Front wheel width is 3.5inch with a 120/70-ZR17 tyre, the rear 4.5inch with a 160/60-ZR17 tyre. A single front 320mm wavy disc and two-piston brake caliper is matched to a 240mm rear disc and single-piston caliper. ABS is fitted as standard.
     
    The CBR500R will be available in the following colour options:
     
    Matt Axis Grey Metallic
     
    Grand Prix Red
     
    Pearl Metalloid White
     
    3.2 Engine
     
        •    Lively twin cylinder power plant’s internal architecture mirrors that of the CBR1000RR
        •    Revised inlet, exhaust and valve timing delivers 4% more mid-range power and torque
        •    Sportier sound from new dual exit muffler
        •    Assist/slipper clutch eases upshifts and manages downshifts
     
    The CBR500R’s A2-licence friendly, 8-valve liquid-cooled parallel twin-cylinder layout offers a well-proportioned balance of physical size and willing, enjoyable power output, with an energetic, high-revving character and zappy top end.
     
    Already strong off the bottom, the target for 2019 development was faster acceleration through a boost in low-to-mid-range power and torque in the 3-7,000rpm range; the 4% improvement comes via altered valve timing – with ‘close’ timing accelerated by 5° – and lift increased 0.3mm to 7.8mm.
     
    Feeding the PGM-FI fuel injection is now a more-or-less straight shot of airflow through the airbox and throttle bodies. The battery has been re-positioned further away (44.1mm versus 13.4mm) from the rear of the airbox intake duct to allow greater airflow; the exhaust muffler now features dual exit pipes, adding a sportier sounding edge to each pulse. Peak power of 35kW arrives at 8,500rpm, with 43Nm torque delivered at 7,000rpm.
     
    Bore and stroke is set at 67mm x 66.8mm; the crankshaft pins are phased at 180° and a primary couple-balancer sits behind the cylinders, close to the bike’s centre of gravity. The primary and balancer gears use scissor gears, reducing noise. The crank counterweight is specifically shaped for couple-balance and its light weight allows the engine to spin freely, with reduced inertia.
     
    Acting as a stressed member, the engine complements the frame’s rigidity with four frame hangers on the cylinder head. Internally the cylinder head uses roller rocker arms; shim-type valve adjustment allows them to be light, for lower valve-spring load and reduced friction.
     
    A silent (SV Chain) cam chain has the surface of its pins treated with Vanadium, reducing friction with increased protection against wear. Inlet valve diameter is 26.0mm with exhaust valve diameter of 21.5mm.
     
    The piston shape is based upon those used in the CBR1000RR Fireblade to reduce piston ‘noise’ at high rpm. Friction is reduced by the addition of striations on the piston skirt (a finish that increases surface area, introducing gaps in which oil can flow for better lubrication). As with the CBR1000RR, an AB 1 salt bath process, used after isonite nitriding, forms a protective oxidisation membrane.
     
    The ‘triangle’ proportion of crankshaft, main shaft and countershaft is very similar to that of Honda’s four-cylinder RR engines and much of the internal structure and engineering is taken directly from the CBR1000RR.
     
    The crankcase uses centrifugally cast thin-walled sleeves; their internal design reduces the ‘pumping’ losses that can occur with a 180° phased firing order. Using the same internal relief structure as that of the CBR1000RR, the oil pump features improved aeration performance, with reduced friction; a deep sump reduces oil movement under hard cornering and braking. Oil capacity is 3.2L.
     
    A six-speed gearbox mirrors that of its RR cousin and uses the same gear change arm structure and link mechanism. New for 2019 an assist/slipper clutch enables lighter upshifts and smooths out any hard downshifts.
     
     
    4. Accessories
     
    A range of Genuine Honda Accessories are available for the CBR500R. They include:
     
    35L top box
    Rear carrier
    Tank bag
    Seat bag
    Tall screen
    Heated grips
    12V Socket
    Seat Cowl
    Wheel Stripes
    Tank Pad
     

    Technical Specifications
    Displacement (cc)471
    Max Power Output kW35.00
    Max Torque (Nm)43
    Fuel Tank Capacity (litres)17.10 l
    Fuel economy (MPG)83.00
    Average range (miles)312.00
    Seat Height785.00 mm
    Kerb Weight192.00 Kg

    Personal Details

    Representative Example, provided for illustration purposes only.

    In PCP finance examples, the final payment is optional and is the minimum guaranteed value of the bike (providing the bike isn't damaged or beyond reasonable wear and tear for the age and mileage). 

    Your options at the end of a PCP agreement are to either hand the bike back to the finance company, use the bike as a part exchange against a new one or pay the final payment and take ownership of the bike.

    In all cases of finance, the motorcycle belongs to the finance house until the final payment is made at the end of the agreement.

    PCP agreements work best when you have a low deposit, want to have low manageable monthly payments and intend to part exchange or sell the bike at the end of the agreement.  If you have a significant deposit, can afford higher monthly payments or plan to keep the bike beyond the term of the agreement then a finance proposal based on a regular monthly payment without a deferred final payment may provide the lowest total cost.  We can talk you through all of the options we can offer.

    Newcastle Motorcycles are a broker not a lender, and can only introduce you to a limited number of lenders.

    For details on the credit broking facilities offered by Newcastle Motorcycles, click here

    Please contact us for more information about part exchange

    Top