Free TrakKING tracker


Code: SH125I
  • £3,359.00
Available | Usually dispatched from the warehouse within 48 hours

    PCP finance from £71


    Model updates: One of Europe’s most popular scooters - the Honda SH125 has been a market leader - it gets an updated look and LED lighting, plus improved performance and EURO4 compliance. It also gains Honda Smart Key technology and a larger glove box housing a DC charger.


     SH125i 17ym




    1 Introduction

    2 Model overview

     3 Key features

     4 Accessories

     5 Technical specifications

      1. Introduction

      Part of the million-selling SH family whose founding member, the SH50, went on sale in 1984, the four-stroke Honda SH125 first hit the market in Europe in 2001. Ever since, for 15 years it has quietly and consistently gone about its mission to provide stylish, fun and fuss-free transport – becoming one of the continent’s favourites along the way. That first machine laid down the blueprint for success: a frugal-natured but lively engine tied to nimble, sure-footed handling underpinned by the stability that large diameter 16-inch wheels deliver – all delivered with elegant, premium styling.

    Fuel injected with PGM-FI in 2005, over the last 11 years the SH125i has come to represent the ultimate in urban transport with the perfect balance of style, reliability, economy and downright usability. And of course its story is one of constant, careful evolution reflecting the developing needs and expectations of owners and Honda’s desire to keep on giving them an even better version of their SH. In 2013 it gained Honda’s eSP (enhanced Smart Power) low friction engine and Idling Stop technology, boosting both power delivery and fuel economy.

     For 2017 the SH125i, manufactured at Honda’s Atessa factory in Italy, is renewed once more. It’s smarter and sharper, even more convenient to use and as cost effective as ever to own and run. It could never be anything else – it is an SH, after all.

      *over 14,000 units sold from January – September 2016

     2. Model Overview

      The unseen foundation of the 17YM SH125i remains unchanged – the tough, easy handling chassis and responsive, efficient engine – but thanks to revised PGM-FI fuel injection overall performance is improved and the machine is now EURO4 compliant.

     What is obviously new is the bodywork, which evolves further the trademark SH flowing curves. The front/rear lights are now LED and as all scooter riders know it’s the details that make all the difference – so the SH125i is now equipped with Honda Smart Key technology, plus a larger glove box with built-in charger.



    3. Key Features

     3.1 Styling & Equipment

     Whatever direction the 17YM SH125i’s styling direction took it had to remain true to the tried and tested SH formula – look great but be ready to work for the rider. And Honda’s team of engineers chose to subtly build on the previous design’s organic shaping by deftly working more sinuous, rounded lines into the body front to back, adding a contemporary feel with even more premium presence. The distinctive headlight, taillight and position light are now also all LED.

     While its form is changed, the SH125i’s overall function firmly revolves around its owner. A natural riding position, with excellent weather protection from the upright front portion of the body, ensures comfort and the flat floor gives a wide degree of freedom for foot placement and getting on and off the machine.

     To make daily life onboard the SH125i that little bit more convenient it’s now fitted with the Honda Smart Key system. The Smart Key itself resides in the rider’s pocket and does away with the need to constantly insert and withdraw a key for ignition, fuel cap and seat. It has two switches: the smart function on/off and ‘answer back’, which flickers the indicators for identification from a distance.

     With the Smart Key present one push of the machine-mounted main switch powers it up and makes it possible to turn, giving the rider control of the ignition and steering lock, and, via two rocker switches, the fuel cap and seat. It also illuminates when pushed – or from the answer back function of the Smart Key – with a blue light.

     Up front the glove box is larger in volume and also now houses a useful 12V charging socket – and of course the all-important utility hook secures bags safely. The 7.5L fuel tank gives a potential range of well over 187.5m..

     The flat seat provides plenty of support and room to move around and its carefully contoured shape, plus the slim floor, makes reaching the ground easy. As many journeys around town involve a pillion there is plenty of room for two; retractable aluminium pillion footplates tuck away when not in use and provide a stable platform – especially under braking – when needed for the passenger.

     A pair of helmet holders are placed either side at the front of the main under-seat storage area, which itself can accommodate a full-face helmet. The large rear carrier – made of super-tough resin – is ready for installation of the optional top box.

     Easy to read analogue meters are used for both fuel and temperature gauges and the speedometer is a large, highly visible dial with a needle that sweeps through its entire arc when the ignition is switched on.


     3.2 Engine

     The SH125i’s engine is a compact, highly durable unit. It makes good power where scooter riders need it most, in the low to mid-range area and is quiet in operation. Revised PGM-FI mapping gives peak power of 9kW @ at 8,500rpm, with peak torque of 11.5Nm delivered @ 7,000rpm.

     And its superb fuel efficiency of 134mpg (WMTC mode) presents low running costs to the owner and a positive environmental message – further enhanced by its new EURO4 status. The allowable limits for exhaust tailpipe pollutants such as carbon monoxide, hyrdrocarbons and nitrous oxide specified by EURO4 are approximately half of those for EURO3.

     A key fuel-saving technology incorporated into the SH125i is Idling Stop. It’s operated via a switch on the right handlebar and, when enabled, automatically stops the engine running after three seconds at idle, and re-starts it instantly when the throttle grip is twisted.

      It’s seamless in use, thanks to a swing-back system that returns the crank to its position before air intake, and a decompression mechanism that negates cranking resistance due to compression. The ACG starter also generates electricity, doing away with a conventional system’s motor and gears.

      The 125cc four-stroke, liquid-cooled 2-valve engine is a masterpiece of mass centralisation. The radiator, rather than being mounted at the front of the machine has been built into the engine itself for a much simpler and lighter layout. Its core is highly efficient allowing the use of a smaller, lighter cooling fan.

      A compact combustion chamber matches burn velocity and cooling performance, perfectly tailoring torque characteristics to suit urban riding conditions. Bore and stroke is set at 52.4 x 57.9mm, with compression ratio of 11.0:1. The air intake port is smooth, assisting gas flow and optimised ignition timing combines with the water jacket and radiator’s efficient cooling to improve ‘knocking’ resistance.

     Low-friction technologies are employed internally; the cylinder sleeve uses minute splines on its outer surface to reduce oil consumption and improve cooling and the cylinder is offset, further reducing friction.

     A shell-type needle bearing is used for the rocker arm shaft while smaller, lighter rollers work in conjunction with the cam profile and valve spring load. Rolling resistance within the transmission is reduced by the use of three main bearings, all designed to deal with the loads they each individually receive.


    3.3 Chassis


     The SH125i’s high-tensile steel tubular underbone frame is manufactured with both rigidity and durability in mind. Lightweight 16-inch aluminium die-cast wheels are key to its sure-footed handling ability and stability on a variety of road surfaces. New for 2017 they mount Michelin City Grip tubeless tyres. Wheelbase is a compact 1340mm, with rake and trail of 26°/85mm. Seat height is 799mm with a wet weight of 136.9kg and 180kg carrying capacity.

      The rear shocks feature 5-step preload adjustment with 83mm axle travel. The 33mm telescopic front forks, with 89mm of travel, ensure excellent road holding and are tuned to give a compliant, yet controlled ride. ABS is fitted as standard; both front and rear discs have a 240mm diameter; the front caliper is a three-piston design, the rear a single piston.

      The 17YM SH125i will be available in 3 colour options:


      Pearl Nightstar Black


    Pearl Cool White


    Lucent Silver Metallic


    4. Accessories

      Available as optional extras for the SH125i are a top box and windshield/knuckle visor that provide extra weather protection, and all fully complement the bodywork’s silhouette.




    5. Technical Specifications







    Liquid-cooled 4-stroke SOHC single

    Engine Displacement (cm³)


    No. of Valves per Cylinder


    Bore ´ Stroke (mm)

    52.4 x 57.9

    Compression Ratio


    Max. Power Output


    Max. Torque


    Oil Capacity





    PGM-FI electronic fuel injection

    Fuel Tank Capacity


    Fuel Consumption






    Battery Capacity

    YTZ8V 7Ah MF

    ACG Output




    Clutch Type

    Automatic; centrifugal

    Transmission Type


    Final Drive





    Tubular Steel Underbone



    Dimensions (LxWxH)

    2,034mm x 740mm x 1,158mm



    Caster Angle




    Seat Height


    Ground Clearance


    Kerb Weight


    Turning radius




    Type Front

    Telescopic Φ33

    Type Rear

    Dual-damper unit swing arm



    Rim Size Front

    16M/C x MT2.50

    Rim Size Rear

    16M/C x MT2.75

    Tyres Front

    100/80-16 inch

    Tyres Rear

    120/80-16 inch



    ABS System Type

    2 Channel




    Honda Smart Key, 12V socket






    All specifications are provisional and subject to change without notice.

    PCP Finance
    Monthly payment£ 71.00
    Customer deposit£ 71.00
    Amount of credit£ 3,288.00
    Number of monthly payments36
    Optional final payment (GFV)£ 1,194.29
    Total amount payable£ 3,831.29
    Representative APR6.9 %
    Option to Purchase Fee£ 10.00
    Annual contracted mileage4000
    Excess Mileage Fee (pence)2p

    Personal Details

    Representative Example, provided for illustration purposes only.

    Where an OTR price is marked **, this representative example will relate to special offer colours.  If you want a quote on a different colour, please call. Our site doesn't yet allow for different finance quotes based on colour chosen.

    In PCP finance examples, the final payment is optional and is the minimum guaranteed value of the bike (providing the bike isn't damaged or beyond reasonable wear and tear for the age and mileage). 

    Your options at the end of a PCP agreement are to either hand the bike back to the finance company, use the bike as a part exchange against a new one or pay the final payment and take ownership of the bike.

    In all cases of finance, the motorcycle belongs to the finance house until the final payment is made at the end of the agreement.

    PCP agreements work best when you have a low deposit, want to have low manageable monthly payments and intend to part exchange or sell the bike at the end of the agreement.  If you have a significant deposit, can afford higher monthly payments or plan to keep the bike beyond the term of the agreement then a finance proposal based on a regular monthly payment without a deferred final payment may provide the lowest total cost.  We can talk you through all of the options we can offer.

    Newcastle Motorcycles are a broker not a lender, and can only introduce you to a limited number of lenders.

    For details on the credit broking facilities offered by Newcastle Motorcycles, click here

    Please contact us for more information about part exchange