We say: So many great things have been said about the Africa Twin since it was re-introduced in 2016 - the proof is in the pudding, and three of the team choosing to buy their own Africa Twin should tell enough of a story itself.
Now we also have the Africa Twin Adventure Sports. More of everything. More travel, more comfort, more upright, more range, more features, more riding modes, more offroad capability and more gorgeous.
The seat height is 900mm as standard, but there is an ultra-low seat height option taking it down to 840mm.
Honda says: A new version of Honda’s definitive full-size adventure machine is ready for Adventure Sports in 2018, with larger fuel tank for a range of over 500km, higher riding position, greater ground clearance, heated grips, extended fairing plus longer travel suspension. It also has Throttle By Wire with 3 riding modes, expanded Honda Selectable Torque Control parameters and revised intake and exhaust. The original Africa Twin’s 30th anniversary is celebrated with unique paint scheme.
2 Model overview
3 Key features
5 Technical specifications
It’s been 30 years since the legendary Honda XRV650 Africa Twin first rolled into Europe and while the motorcycle that now bears its name – launched in 2016 as the CRF1000L Africa Twin – shares no common part with the forerunner it inherits the essence and spirit of what made the original so good.
The balance between power and weight is the Africa Twin’s secret, then and now. The renewed machine has proved itself a modern-day all-rounder, popular with casual tourers and off-road adventurers alike (plus all riders in between) because it offers enjoyable and usable engine performance in a chassis that works as well on-road as it does off.
For 2018 Honda is building on the Africa Twin’s strengths, and its success. The base model CRF1000L Africa Twin receives a host of detail upgrades to both manual transmission and Dual Clutch Transmission (DCT) options that enhance the riding and owning experience, while the new CRF1000L Africa Twin Adventure Sports version extends the platform even further into long-range off-road ready territory.
Mr K. Morita, Large Project Leader (LPL) 18YM Africa Twin Adventure Sports
“Our CRF1000L Africa Twin has proven itself a worthy successor to the original and very much the ‘Go Anywhere’ machine that we set out to make. Over the last two years it’s a motorcycle that’s covered millions of kilometres, and we have received plentiful feedback from owners. For 2018, with the Africa Twin Adventure Sports we have used the revised CRF1000L as a starting point and added everything the long-distance rider needs to get the very most out of any adventure.”
2. Model Overview
Side-by-side with its sibling, the CRF1000L Africa Twin Adventure Sports is obviously taller, with a flatter seat profile and more upright riding position. The fairing and screen offer more wind protection and a large sump guard and side pipe fully protect the machine. An extra 5.4L fuel capacity extends range beyond 300 miles, while heated grips and an AC charging socket add comfort and convenience.
The Africa Twin Adventure Sports’ comprehensive abilities start with its engine, which has to perform in off-road situations as well as on-road, over long-range tours, short commutes and all points in between. As such, it provides an optimum balance between power, torque, mass and physical dimension.
The four-valve 998cc parallel twin Unicam unit’s tractable and usable all-day performance belies its extremely compact dimensions. They are the result of clever packaging touches such as housing the water pump within the clutch casing, and using the engine’s balancer shafts to also drive water and oil pumps. As a result, longitudinally, it is the same length as Honda’s popular 500cc engine, and its short height contributes to the Africa Twin Adventure Sport’s 270mm of ground clearance.
For 2018, a modified airbox improves the power unit’s mid-range response, as does a lighter balancer shaft weight. A revised exhaust serves up an even more evocative howl as revs rise and also contributes to the improved performance.
A significant addition to the Africa Twin platform for 2018 is its new Throttle By Wire (TBW) system, which brings with it 3 riding modes to adjust engine character and output to suit riding conditions. Also new is an extended range of Honda Selectable Torque Control (HSTC) input.
The semi-double cradle steel frame provides the ideal balance of high-speed stability matched to genuine off-road ability by combining sheer strength with flexibility. The engine is mounted on 6 engine hangers, which keeps vibration to a minimum, avoiding the need for steering dampers. The new lithium-ion battery saves 2.3kg on the 2017 Africa Twin’s lead unit, and the Adventure Sports version shares several detail changes made to improve the platform’s off-road ability and durability.
Fully adjustable 45mm Showa inverted forks, fully-adjustable rear shock, dual radial-mount Nissin four-piston brake calipers and 310mm ‘wave’ style floating discs are unchanged for 2018. The 21-inch front and 18-inch rear spoked wheels are constructed from stainless steel. In addition to the standard dual-purpose 90 front/150 rear rubber, block tyres are also approved for fitment.
Dual LED headlights maintain the original Africa Twin’s presence and the seat height adjusts 20mm from the 900mm to 920mm (both respectively 50mm higher than the standard model). The 24.2L fuel tank – and the engine’s fuel efficiency of 61.6 mpg (WMTC in DCT mode) – provides a range of over 300 miles.
The 2018 CRF1000L Africa Twin Adventure Sports will be available in one 30th anniversary Tricolore paint scheme to celebrate the XRV650’s launch in 1988.
3. Key Features
• Longer travel suspension, flatter seat and more upright riding position
• Extended fairing protection and taller screen
• Heated grips as standard plus AC charging socket
• Rider’s footpegs/pillion footpeg hangers designed for off-road use
• Stainless steel spokes offer durability and ease of care
• Emergency Stop Signal function for rear indicators
The Africa Twin Adventure Sports’ steel semi-double cradle frame provides nimble on-road manners plus high-speed stability matched to genuine off-road ability, agility and strength. Ground clearance is 270mm (20mm more than the Africa Twin) with wheelbase of 1575mm and rake and trail of 27.5°/115. Wet weight is 243kg
With stroke length of 252mm (up 22mm on the standard Africa Twin) the 45mm Showa cartridge-type inverted front fork offers excellent long-travel performance and control; rebound and compression damping are fully adjustable. A cast aluminium top yoke and forged bottom yoke – joined by hollow aluminium stem shaft – clamp the fork legs with two bolts each top and bottom.
Matching the supple front suspension the Showa rear shock delivers an extra 20mm travel, at 240mm. Its upper mount is set low for mass centralisation and it features a 46mm cylinder remote reservoir for stable damping control under more extreme off-road riding conditions. Spring preload can be adjusted via a dial on the shock body; rebound and compression damping are also fully adjustable.
There are some other updates shared between both Africa Twins that off-road riders are sure to appreciate: the rider’s footpegs are now wider, and feature beefed-up steel mounting plates. The pillion footpeg hangers have also been redesigned to allow more room for the rider’s feet when standing and the instruments are angled at a shallower angle to allow the rider to see them easily from a standing position.
The Africa Twin Adventure Sports’ styling is less minimalist than the Africa Twin; the dual headlights are shared but it has a larger fairing matched with an 80mm taller screen to offer greater wind protection. It also features heated grips as standard plus an AC socket.
A large sump guard is unique to the machine and protects the underside while the front side pipes guard the bodywork. Brushed aluminium cowling panels add tough appeal and class; the rear mudguard and stainless steel rack are also easily removed. Aluminium side cases will be available.
For extended off-road use the seat features a flatter profile – and is 50mm taller – than the standard CRF1000L Africa Twin. It adjusts 20mm to either 900mm or 920mm (compared to 850mm and 870mm); there’s also a rear side pocket tucked away on the right. To match the raised seat height the handlebar position is 32.5mm higher and pulled back 5mm.
The rear indicators now also offer an Emergency Stop Signal function. At a minimum speed of 53km/h, with either brake working, if negative acceleration of a minimum of 6.0m/s2 is detected the hazard lights flash, warning other road users a hard stop is in process. At the same speed the threshold is reduced with ABS in play – for wet conditions – to a negative acceleration of a minimum 2.5m/s2.
The indicators now also auto-cancel. Rather than using a simple timer, the system compares front and rear wheel speed difference and calculates when to cancel the indication relative to the situation.
Compact two-piece radial-mount four-piston calipers work dual 310mm ‘wave’ floating discs through sintered pads and serve up consistent stopping power and feel on-road or off. The rear 256mm ‘wave’ disc features hole punching and shaping to deliver secure braking performance. Lightweight two-channel ABS can be turned off for the rear caliper only.
Like the CRF450R Rally, the CRF1000L Africa Twin Adventure Sports uses 21/18-inch front rear spoked wheels, wearing 90/90-21 and 150/70-18 tyres. The spokes are manufactured in stainless steel, for improved durability and ease of care.
Block pattern tyres (Continental 90/90-21M/C 545 and 150/70 B18M/C 70Q, rated at 180km/h and 160km/h respectively) are now approved by Honda for fitment to take full advantage of the Africa Twin Adventure Sports’ off-road abilities.
3.2 Engine Management Electronics
• Throttle By Wire (TBW) brings with it 3 rider modes to tailor engine character and traction
• The riding modes are comprised of different levels of Power (P), Engine Braking (EB) and Honda Selectable Torque Control (HSTC)
• HSTC now has 7 levels and OFF
The Africa Twin Adventure Sports’ 998cc SOHC 8-valve parallel-twin engine’s 2018 upgrade sees it receive Throttle By Wire (TBW) plus riding modes and expanded Honda Selectable Torque Control (HSTC).
The use of TBW greatly expands the choices available to the rider to manage engine output, feel and rear wheel traction to suit different riding conditions. Whereas the 2017 Africa Twin had 3 Levels of HSTC, plus OFF, the new system features 7 Levels – from Level 1, for aggressive riding off-road on block pattern tyres, to Level 7 for maximum sense of security on slippery, wet tarmac. It remains possible to turn HSTC completely OFF.
There are also 3 levels of Power and Engine Braking available.
In a set-up first used on the RC213V-S – Honda’s street legal version of its MotoGP racer – three riding modes offer pre-set combinations of each parameter, suitable to different riding environments and scenarios:
TOUR employs the maximum Power (1), mid-range Engine Braking (2) and high HSTC (6).
URBAN uses mid-level Power (2) and Engine Braking (2) and high HSTC (6).
GRAVEL mode allows the lowest level of Power (3) and EB (3) with high HSTC (6).
A fourth mode – USER – allows the rider to set and save his or her preferred combination of Power, EB and HSTC levels. Both riding mode and level of HSTC can be changed at anytime using the controls on the left hand switchgear.
• New intake design and exhaust aid mid-range response
• New exhaust also designed to improve engine note
• New lighter balance shaft weight
• New lithium-ion battery saves 2.3 kg and enhances durability
• Power is smooth and consistent, with linear torque delivery
• Assist/slipper clutch helps upshifts and downshifts
Alongside the new engine management electronics for 2018, the airbox now features a 20mm longer funnel length, matched with redesigned exhaust internals to significantly boost mid-range response and sound. The 2-1 downpipe now feeds gas flow through two catalysers (rather than one) into a simplified, smaller volume (4.6L to 4L) muffler that houses two chambers rather three.
Peak power of 94 bhp still arrives @ 7,500rpm, with 99Nm torque @ 6,000rpm. Bore and stroke are set at 92 x 75.1mm, with compression ratio of 10.0:1; the 270° phased crankshaft and uneven firing interval create the engine’s distinctive throb and feel for rear wheel traction.
Good ground clearance – crucial to off-road performance – starts with a compact, short engine. So the crankcases are split vertically; the water pump is housed within the clutch casing with a thermostat integrated into the cylinder head. Manual and DCT versions of the engine share common crankcases with only minor external differences. The water and oil pumps are driven by the engine’s balancer shafts; for 2018 300g has been shaved from the balance weight, reducing inertia by 306g/cm2, further adding to the character and feel of the power delivery.
Four-valve cylinder heads, fed by PGM-FI fuel injection, each employ twin spark plugs and dual and sequential ignition control for even combustion. Honda’s SOHC Unicam valve train is a feature of the CRF450R and the low-set position of the cast camshaft contributes to the compact nature of the cylinder head. The inlet valves are 36.5mm in diameter, the exhaust valves 31mm.
The engine uses a semi-dry sump and in-tank lower crankcase oil storage. This allows a lower pan depth, reducing overall engine height. As the pressure-fed pump is located within the tank where it delivers its oil from, there is no need for a pressure-feed passage; again saving weight and space.
Secondary vibrations are neutralised by the mutually reciprocating motion of the pistons, while primary inertial and coupling vibrations are cancelled by the use of biaxial balance shafts. The front balancer shaft uses two weights, the rear only a single weight in order to save weight.
The aluminium clutch centre and pressure plate use ‘assist’ cams to ease upshift and downshift (with light lever feel) and ‘slipper’ cams for deceleration and downshifting. The six-speed gearbox uses ‘pierced’ shape dogs for 1st, 2nd, 3rd and 4th gear, allowing use of a smaller, lighter clutch. Oil gathering ribs on the main journal side of the primary gear ensure consistent lubrication for the gear, damper spring and primary sub-gear.
The lightweight six-speed manual gearbox uses the same shift-cam design as found on the CRF450R to ensure positive changes, and is equipped with an aluminium assist slipper clutch.
New for 2018 a lithium-ion battery is 2.3kg lighter than the lead unit of the 2017 Africa Twin, and offers greater longevity, both in terms of life and the ability to hold onto a charge when left.
A quickshifter is available as an optional extra.
A full range of genuine Honda accessories are available for the CRF1000L Africa Twin Adventure Sports, including:
Rubber pillion footpegs
DCT foot shifter
Two types of lower seat
|Monthly payment||£ 133.64|
|Customer deposit||£ 1,499.00|
|Amount of credit||£ 11,500.00|
|Number of monthly payments||47|
|Optional final payment (GFV)||£ 5,211.10|
|Total amount payable||£ 12,999.00|
|Representative APR||0 %|
|Option to Purchase Fee||£ 0.00|
|Promotion end date||July 31|
|Annual contracted mileage||4000|
|Excess Mileage Fee (pence)||4p|
Representative Example, provided for illustration purposes only.
Where an OTR price is marked **, this representative example will relate to special offer colours. If you want a quote on a different colour, please call. Our site doesn't yet allow for different finance quotes based on colour chosen.
In PCP finance examples, the final payment is optional and is the minimum guaranteed value of the bike (providing the bike isn't damaged or beyond reasonable wear and tear for the age and mileage).
Your options at the end of a PCP agreement are to either hand the bike back to the finance company, use the bike as a part exchange against a new one or pay the final payment and take ownership of the bike.
In all cases of finance, the motorcycle belongs to the finance house until the final payment is made at the end of the agreement.
PCP agreements work best when you have a low deposit, want to have low manageable monthly payments and intend to part exchange or sell the bike at the end of the agreement. If you have a significant deposit, can afford higher monthly payments or plan to keep the bike beyond the term of the agreement then a finance proposal based on a regular monthly payment without a deferred final payment may provide the lowest total cost. We can talk you through all of the options we can offer.
Newcastle Motorcycles are a broker not a lender, and can only introduce you to a limited number of lenders.
Please contact us for more information about part exchange